Catalogue
The electric diesel fuel transfer pump uses a copper motor, high efficiency and energy saving, stable and reliable, good electrical conductivity, strong stability and corrosion resistance, and can provide powerful power. The impeller is made of alloy steel, durable, not easy to deform, plum-shaped design, not easy to get stuck.
The fuel transfer pump can be widely used in oil drum pumping, car refueling, excavator refueling, agricultural equipment refueling, tractor refueling, and ship refueling. But it should be noted that the electric fuel transfer pump is only suitable for diesel, biodiesel and kerosene, and cannot be used for gasoline, liquefied petroleum gas, alcohol and other low flammability fuel.
These pumps have a number of vanes that are free to slide into or out of slots in the pump rotor. When the pump driver turns the rotor, centrifugal force, push rods, and/or pressurized fluid causes the vanes to move outward in their slots and bear against the inner bore of the pump casing forming pumping chambers.
As the rotor revolves, fluid flows into the area between the vanes (pumping cambers) when they pass the suction port. This fluid is transported around the pump casing until the discharge port is reached. At this point the fluid is squeezed out into the discharge piping
The cans are made of stainless steel. they are available in any capacity from 5 liters.
CHRS covers and frames are made of composite material of fiberglass and special resin that is moulded at high temperature and high pressure with the standard of EN124:1994.
Features
- Manufactured to BS: EN124 Class D400&C250
- Skid resistance
- 900mm (35.4”) Clear opening
- Lockable with screws
- Sealed with rubber
- Manhole lid lifter :ID2242/ID692
- Color available as black, grey , green, yellow and others
- Clients customized service
The DOMS PSS 5000 has been installed on over 100,000 sites across more than 100 different countries. It is designed to provide scalability and flexibility and is the gateway to forecourt automation. Integrating wetstock control, pumps and dispenser control, price pole, payment, attendant tagging and automatic vehicle identification, amongst many others, the DOMS PSS 5000 offers a broad range of connectivity that enables full connectivity to all your forecourt devices.
As a system component in the POS environment, PSS 5000 overcomes the complex differences between a petrol station forecourt and the retailing environment, enabling control of all types of forecourt equipment with the POS, BOS and head office systems.
The DOMS PSS 500 supports more than 100 different protocols, including IFSF.
The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at 50 or 60 Hz., with temperatures ranging from -100°C to +400°C, these pumps provide very high reliability, high interchangeability, easy accessibility to the inner parts and minimum maintenance.
The pump casings are radially split, centerline supported with end suction and top discharge, single or double volute. Axial balance is achieved by means of balancing holes on the impeller. Oversized thrust bearing versions are available for high suction pressure applications. A wide choice of hydraulics is available to optimize pump selection at any design point, thus reducing the operating costs. Minimum shaft deflection, due to minimum impeller overhung with respect to bearings, ensures long trouble-free seal life. A sturdy and deep stuffing box allows to fit cartridge mechanical seals, according to API 682 norms. Bearing housing cooling, if required, is achieved by means of a stainless steel cooler of innovative design. As an alternative, a cooling fan fitted directly on pump shaft can also be offered on all pump models. All constructive materials, as per API 610 material tables, are available. Other material combinations such as erosion/corrosion resistant alloys are also available for specific applications
Our fuel dispensing hose range contains a variety of fuel delivery hoses and fuel suction hoses, including diesel hose, fuel oil, petrol grease etc. Available open ended, in coils or in complete kits, Unicorn offers the complete range.We are very flexible in providing you with the lengths and ends you require. As well as fuel pump hoses, we also sell gravity hose kits for gravity fed fuel tank installations.
Galvanized pipe maintains a wide range of benefits, suitable for use in highly corrosive environments. The semi-smooth, zinc finish of galvanized steel pipe provides a layer of protection that is not seen in other types of protective materials. The galvanized coating process protects the underlying steel from encountering corrosive elements that could deteriorate the steel and ultimately weaken its structural integrity. Main advantages of galvanized structural pipe include:
- Protects against corrosion and rust
- Increased structural longevity
- Overall enhanced reliability
- Affordable protection
- Easy to inspect
- Less repairs
- Rugged toughness
The ART of Dispensing
Frontier Series I offers functional and reliable high hose and low hose models in single and dual configurations. Models are available as a suction or pressure type, and use rugged Gilbarco Veeder-Root global components, making them dependable even in harsh field conditions. Series I is offered in Standard Flow-40LPM and High Flow-80LPM options.
High to medium throughput sites that need functionality together with consistent reliability will find the Series I high hose model a great choice.
The ART of Dispensing
The Frontier Series I offers functional and reliable high hose and low hose models in single and dual configurations. Models are available as a suction or pressure type, and use rugged Gilbarco Veeder-Root global components, making them dependable even in harsh field conditions. Series I is offered in Standard Flow-40LPM and High Flow-80LPM options.
Low throughput sites or cost efficient independent owners find Series I low hose model best suited for their needs. It offers excellent value on price, functionality and reliability.
Modern design fuel dispenser for up to 2 fuel grades.
- New age design: Fresh design that attracts more drive-ins to your station
- Scalability for future expansion: Protect capital investment for future innovations
- Powersafe Electronics: Perform in varying power conditions.
- Unparalleled Security: Protect your assets as well as brand equity from tampering instances
New age design: Fresh design that attracts more drive-ins to your station
Scalability for future expansion: Protect capital investment for future innovations
Powersafe Electronics: Perform in varying power conditions.
Security of your assets was one of your biggest concerns. So we made it ours.
Unparalleled Security: Protect your assets as well as brand equity from tampering instances
Unicorn OPW Engineered Systems is a world-class manufacturer of quick and dry disconnect fittings designed to meet any fluid handling need. OPW is the expert in reducing the hazards involved with fluid handling for a multitude of industries with products used worldwide in a broad range of applications. A complete line of connections are available, including the Kamlok® and Autolok® quick disconnects, and for connections that require a dry disconnect, Kamvalok®, Drylok™ and Epsilon®, all suitable for an extensive range of hazardous liquid applications. For extreme pressure and temperature sealing applications, the Hiltap™ brand offers innovative, high-performance couplings and connectors.
We offer the most complete line of loading arm systems and loading-rack equipment for today's bulk loading and unloading requirements. Loading arm systems allow the transfer of gas or liquefied gas from one tank to another through a pipe system. When transferring gas, you will need both a bottom and top loading arm. Whether the application involves tank trucks, railcars, drums or totes, and the moving of petroleum products, liquefied gases, asphalt, solvents or hazardous/corrosive chemicals, OPW Engineered Systems is the preferred loading arm system choice worldwide.
Combined with keyboard,display,combination 12V/24V or 220V pump and flowmeter,4M delivery rubber hose,2M inlet clean plastic hose,filter,solenoid valve(option),automatic shutoff fuel nozzle with 360 degree nozzle swivel.
You can preset the total volume or price,and start refueling,the pump dispenser would stop when it arrives at the number set.All in all,it is quite a practical choice for diesel/gasoline transferring.
The Liquid Controls M-Series Model M40 rotary motion positive displacement meter offers the ultimate in measurement accuracy for custody transfer of LPG, petroleum products, aviation fuels and a broad range of industrial liquids. The M-Series meets NTEP and International Weights & Measures accuracy requirements as well as U.S. Military specifications.
- Model: M40
- Size: 4"
- Flow rate: 450 gpm (1700 lpm)
- Pressure: 150 psi (10.5 Bar)
- Temperature range: -40° F to 160° F (-40° C to 71° C)
- Viscosity rage: 30 SSU to 1,500,000 SSU (less than 1 centipoise to 325,000 centipoise
- Materials of construction: Aluminum, Cast Iron or Stainless Steel
The Elite S automatic shutoff nozzle is designed for retail and commercial fueling sites. The familiar styling brings comfort to the end user while the lightweight construction produces a smooth- working, rugged nozzle specifically designed for safety and endurance.
The Elite S Prepay pressure-sensitive nozzle has undergone extensive engineering upgrades specifically designed to deliver the most reliable functioning nozzle. The pressure- sensitive (no pressure, no flow) feature enables the station operator to control the dispensing of fuel. The Elite S features a user-friendly one-hand hold-open latch, and the standard safety attitude device feature provides automatic shut-off if raised above horizontal or if it falls from the vehicle.
A range of two stage air compressors, that consist of two or more cylinders.The two stage compressor consists of two or more cylinders. The atmospheric air enters into the low pressure (LP) cylinder through an inlet filter & valve which passes to the high pressure (HP) cylinder through the inter-cooler for a final pressure.
The highly efficient inter-cooler provides maximum heat dissipation between stages resulting in more air per horse power and less trouble from carbonation.
Two Stage Air Compressors are useful in textile, plastic industries, paper industries, spray painting, blowing, cleaning, chemical plants, pneumatics, ceramics, automobiles, foundries, pharmaceuticals, service stations, etc.
The Piusi K33 mechanical fuel flow meter measures the exact quantity of the dispensed diesel fuel or oil through a nutating disk system. The K33 fuel flow meter measures up to 999.9 litres, and is reliable, inexpensive, and easy to install. Thanks to their reduced flow resistance, these Piusi diesel and oil flow meters can also perform well under gravity flow conditions. There are separate models available specifically for diesel fuel and oil.
- Oil and diesel flow meter
- Flow rate: 20-120ltr Per Min
- Can be rotated to allow flow from 4 directions
- 1” F x F BSP Inlet/Outlet
- Nutating disk system
- Accuracy +/-1% after calibration
- 3 digit resettable and 6 digit non-resettable totaliser
IUSI Mechanical Flow Meter K44, 4 Digit 25mm FF, 20-120lpm Litre Display
- Oil and diesel flow meter.
- Piusi products feature a nutating disk system to accurately count how much diesel fuel or oil has been transferred.
- The K44 fuel dispensers flow meter is a cost effective solution to measuring the flow of fuel up to 9999.9 litres at a time.
- As well as being suitable for pumping system, these Piusi diesel and oil flow meters are also compatible with gravity fed systems once installed.
- There are versions of these fuel flow meters specially designed for both diesel fuel and oil depending upon the users' requirements.
- The product dispensers Flow rate: 20-120ltr Per Min.
- Can be rotated to allow flow from 4 directions.
- 1” F x F BSP Inlet/Outlet.
- Nutating disk system.
- Accuracy +/-1% after calibration.
- 4 digit resettable and 8 digit non-resettable totaliser.
- OPTION for Pulse Output Part # 00056500A-CATA - Open collector card type, frequency 10 pulses/litre, power supply 6-24 V DC, max 10 mA.
The Piusi K24 digital fuel pulse meter is a turbine pulse meter, designed for measuring the transfer of low viscosity fluids including diesel, water and windscreen fluid. This Piusi diesel pulse meter is easy to install either inline or by the delivery nozzle, and are equipped with a display which can be rotated in 4 different positions, allowing easy reading. The K24 electronic fuel pulse meter is known for its accuracy and reliability.
- Diesel pulse meter
- Flow rate: 5-120ltr Per Min
- Fluid viscosity: 2-5.35 cSt - Max Temperature 50deg C
- 1” M BSP Inlet/Outlet c/w socket
- Accuracy +/-1% after calibration
- Electronic card with LCD display
- 5 digit partial totaliser and 6 digit totaliser
Features & Benefits
- Long-Term Watertight Performance/Strength & Rigidity – one-piece design provides reliable watertight integrity and long product life.
- Designed to resist deformation and high water table forces.
- Installation Flexibility – multiple flats provide maximum area for locating pipe entries.
- Easy Field Height Adjustability – the special ribbed height adjustment design makes adjustments to finished grade, if necessary, quick and easy.
Printed Circuit Board Assembly CRIND Regulator
- Dimensions (Hand Measured): 9.5" x 6"
- Card reader dispenser
- Fuel pump system
Red Jacket STP is the most widely installed submersible fuel pump in the world. And that’s because Red Jacket continues to deliver the highest efficiency and fuel flow, together with the lowest power consumption, in the industry. Since 1878, Red Jacket has continued our tradition of building a high quality, reliable pump that is BUILT TO LAST.
Superior motor design
- Higher flow rates, lower power consumption, and increased safety and reliability.
- Up to 5% Increased Flow – Improved stator and receptacle housing design provides larger fuel paths.
- 8% Less Power Consumption – More efficient motor design results in 8% reduction in wattage.
- Better Quality – Red Jacket’s motor manufacturing yields improved quality, which means more station uptime than other STPs on the market.
- Universal Compatibility – Fewer parts to stock.
- Improved Reliability – Improved bearing design and upgraded insulation yield longer motor life.
- Increased Safety – Maximum temperature remains ~125 degrees cooler vs. competitive models. Enhanced connectors separation meets latest flameproof standards.
- Fast installation, simple service and testing, and sets the standard for electrical and environmental safety:
- Built-in Isolated Contractor’s Box – Electrical connection housing is built into the manifold and is completely isolated from the fuel path.
- Easy to Install and Service – No adjustment required to fit yoke, assembly is quick.
- Increased Electrical Safety – Automatic electrical yoke disconnects upon removal of extractable bolts.
- Environmentally Friendly – Automatic breaking of extractible seal upon bolt removal ensures automatic fuel drain back into tank, protecting the environment from contamination and site owners from related liability.
- Innovative Check Valve Design – “Open” setting makes for easier line tests and servicing.
Electrofusion Pipework
A True Liquid Tight Solution
Since being introduced as the world’s first electrofusion pipework system for fuel applications over thirty years ago, UPP semi-rigid pipework has become known globally as the standard for liquid tight pipework systems. Synonymous with words like “safe”, “efficient” and “simple” throughout petroleum equipment installer circles, UPP pipework utilises the advanced electrofusion welding process to effectively bond system components together into one, leak proof system.
Download Datasheet
Simple Installation
The UPP electrofusion welding process is safe and simple to complete in any climate and virtually any weather condition. An installer simply prepares the components, fits them together attaching welder leads to the fitting, and then presses a single button on the welding unit to initiate the process. The welder unit itself calculates the exact settings required to complete the weld, regardless of the pipework diameter or temperature, leaving no settings for the installer to input.
Designed to deliver a constant voltage to a load at its output terminals regardless of the changes in the input or incoming supply voltage. It protects the equipment or machine against over voltage, under voltage, and other voltage surges.
Total Access
You can access or monitor your sites via any web browser on a PC or PDA. The TLS-450 Direct AccessT software can be downloaded on a PC to securely control and modify configuration, upgrades and diagnostics
Total Control
Customize multi-level password access, alarms, email notifications, reports, built-in “help” and dashboard views to make sure all sites are under control.
Master Set up
Factory-loaded setup on the TLS – 450 offers uniform configuration across all sites, including passwords. This blocks unauthorized changes to your set up and notifies you of any modifications
Extended Storage
Back up of reports, alarms, compliance, inventory, delivery and reconciliation data for up to 3 years
Automatic Reconciliation
Identify causes of variance for quick resolution and save you money.
Removes many of the traditional uncertainties associated with wet stock loss analysis, allowing operators to quickly comprehend the effects of delivery, temperature and other variances and understand the critical areas on which to focus efforts for maximum advantage.Your site will benefit from optimum inventory, better delivery scheduling and reduced risk outages
Graphical touch screen display for easy operation
Simple, touch-screen menu navigation means that clearly presented key facts and figures are literally at your fingertips.Intuitive operation means site staff can quickly and easily use the system with the minimum of training.
Optimal risk management and environmental protection for the whole forecourt
Cover all aspects of loss using leak sensor monitoring, automatic reconciliation of fuel throughput and identification of variance components of temperature delivery. Protect pressure lines by testing to precision levels as the site operates, with STP shutdown for leaks, water detection and dry-run conditions.
More Control
Track every drop of fuel from supply points to delivery in your customers’ tanks
Timely reporting that helps you make decisions fast
Less Effort
Drive more efficient fuel operations by improving fuel management and inventory control
Resolve ATG alarms remotely, improving site up time and lowering servicing costs
Simplify compliance paperwork and reduce your risks
Compliance management doesn’t generate revenue, but it can affect your bottom line. If not managed properly, compliance management can drain your resources and expose you to environmental and financial risks
Key benefits:
Automated SIR or Manual
Loss identification, indication of theft, temperature variance, short deliveries and over dispensing from pumps
Leak detection and risk management in compliance with APEA Blue Book Leak Detection Systems Class 6a and 6b- Independently certified to meet US EPA requirements of 0.38 or 0.76 litres per hour leak detection- Automated reconciliation and loss reports- No tank gauge, No problem! Gilbarco Veeder-Root offer SIR services using manual data collection and by using statistical analysis, we can suggest corrective actions
Variance Management Identifies the amount of fuel variance due to temperature and short delivery on each site each month
Alarm Management Real-time management of tank gauge alarms with diagnostics, remote fix and dispatch management
Alarm Monitoring Automatic third-party email notification of critical tank events
- Inventory Planning
- Delivery Scheduling
- Delivery Verification
- Provide an audit trail of deliveries across the network
- Daily Loss Advisor
- Identifies controllable sources of fuel loss quickly
- Set-Up Monitoring
- Flow Management
The Multi Use Media Isolated Probe kit allows the industry-proven Mag Plus Probe to provide Chemical* and LPG** customers the same high levels of inventory measurement performance that petroleum customers have come to expect from Veeder-Root.
A unique feature of this adapter kit is the user’s ability to remove the probe shaft from its stainless steel jacket for maintenance at any time without disturbing the tank’s liquid product contents, or in the case of an LPG customer, having to first depressurise the tank.
Key benefits:
- Highly accurate Magnetostrictive measurement technology compatible with all current TLS consoles.
- Non-corrosive, stainless steel tubing for long-life monitoring in a wide spectrum of alternative fluids and pressurised environments.
- Chemical adapter kit’s Stainless Steel Floats can be used in all NEC Class1, Group D liquids environment specific gravity of .70 or above.
- Chemical adapter kit equipped probe capable of reading product level down to 3.3″.
- LPG adapter kit equipped probe capable of reading product level down to 3.25″.
- Chemical adapter kit allows probe to easily fit into a 2″ NPT tank opening.
- LPG adapter kit easily fits a 1.5″ NPT tank opening.
- Both Chemical and LPG kit probes are easily removed from tank without disturbing liquid inventory or having to depressurise the LPG tank.
The electric diesel fuel transfer pump uses a copper motor, high efficiency and energy saving, stable and reliable, good electrical conductivity, strong stability and corrosion resistance, and can provide powerful power. The impeller is made of alloy steel, durable, not easy to deform, plum-shaped design, not easy to get stuck.
The fuel transfer pump can be widely used in oil drum pumping, car refueling, excavator refueling, agricultural equipment refueling, tractor refueling, and ship refueling. But it should be noted that the electric fuel transfer pump is only suitable for diesel, biodiesel and kerosene, and cannot be used for gasoline, liquefied petroleum gas, alcohol and other low flammability fuel.
These pumps have a number of vanes that are free to slide into or out of slots in the pump rotor. When the pump driver turns the rotor, centrifugal force, push rods, and/or pressurized fluid causes the vanes to move outward in their slots and bear against the inner bore of the pump casing forming pumping chambers.
As the rotor revolves, fluid flows into the area between the vanes (pumping cambers) when they pass the suction port. This fluid is transported around the pump casing until the discharge port is reached. At this point the fluid is squeezed out into the discharge piping
The cans are made of stainless steel. they are available in any capacity from 5 liters.
CHRS covers and frames are made of composite material of fiberglass and special resin that is moulded at high temperature and high pressure with the standard of EN124:1994.
Features
Manufactured to BS: EN124 Class D400&C250
Skid resistance
900mm (35.4”) Clear opening
Lockable with screws
Sealed with rubber
Manhole lid lifter :ID2242/ID692
Color available as black, grey , green, yellow and others
Clients customized service
The DOMS PSS 5000 has been installed on over 100,000 sites across more than 100 different countries. It is designed to provide scalability and flexibility and is the gateway to forecourt automation. Integrating wetstock control, pumps and dispenser control, price pole, payment, attendant tagging and automatic vehicle identification, amongst many others, the DOMS PSS 5000 offers a broad range of connectivity that enables full connectivity to all your forecourt devices.
As a system component in the POS environment, PSS 5000 overcomes the complex differences between a petrol station forecourt and the retailing environment, enabling control of all types of forecourt equipment with the POS, BOS and head office systems.
The DOMS PSS 500 supports more than 100 different protocols, including IFSF.
The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at 50 or 60 Hz., with temperatures ranging from -100°C to +400°C, these pumps provide very high reliability, high interchangeability, easy accessibility to the inner parts and minimum maintenance.
The pump casings are radially split, centerline supported with end suction and top discharge, single or double volute. Axial balance is achieved by means of balancing holes on the impeller. Oversized thrust bearing versions are available for high suction pressure applications. A wide choice of hydraulics is available to optimize pump selection at any design point, thus reducing the operating costs. Minimum shaft deflection, due to minimum impeller overhung with respect to bearings, ensures long trouble-free seal life. A sturdy and deep stuffing box allows to fit cartridge mechanical seals, according to API 682 norms. Bearing housing cooling, if required, is achieved by means of a stainless steel cooler of innovative design. As an alternative, a cooling fan fitted directly on pump shaft can also be offered on all pump models. All constructive materials, as per API 610 material tables, are available. Other material combinations such as erosion/corrosion resistant alloys are also available for specific applications
Our fuel dispensing hose range contains a variety of fuel delivery hoses and fuel suction hoses, including diesel hose, fuel oil, petrol grease etc. Available open ended, in coils or in complete kits, Unicorn offers the complete range.We are very flexible in providing you with the lengths and ends you require. As well as fuel pump hoses, we also sell gravity hose kits for gravity fed fuel tank installations.
Galvanized pipe maintains a wide range of benefits, suitable for use in highly corrosive environments. The semi-smooth, zinc finish of galvanized steel pipe provides a layer of protection that is not seen in other types of protective materials. The galvanized coating process protects the underlying steel from encountering corrosive elements that could deteriorate the steel and ultimately weaken its structural integrity. Main advantages of galvanized structural pipe include:
Protects against corrosion and rust
Increased structural longevity
Overall enhanced reliability
Affordable protection
Easy to inspect
Less repairs
Rugged toughness
The ART of Dispensing
Frontier Series I offers functional and reliable high hose and low hose models in single and dual configurations. Models are available as a suction or pressure type, and use rugged Gilbarco Veeder-Root global components, making them dependable even in harsh field conditions. Series I is offered in Standard Flow-40LPM and High Flow-80LPM options.
High to medium throughput sites that need functionality together with consistent reliability will find the Series I high hose model a great choice.
The ART of Dispensing
The Frontier Series I offers functional and reliable high hose and low hose models in single and dual configurations. Models are available as a suction or pressure type, and use rugged Gilbarco Veeder-Root global components, making them dependable even in harsh field conditions. Series I is offered in Standard Flow-40LPM and High Flow-80LPM options.
Low throughput sites or cost efficient independent owners find Series I low hose model best suited for their needs. It offers excellent value on price, functionality and reliability.
Modern design fuel dispenser for up to 2 fuel grades.
New age design: Fresh design that attracts more drive-ins to your station
Scalability for future expansion: Protect capital investment for future innovations
Powersafe Electronics: Perform in varying power conditions.
Unparalleled Security: Protect your assets as well as brand equity from tampering instances
Bronchure (PDF)
Request A Quote
Modern design fuel dispenser for up to 2 fuel grades.
New age design: Fresh design that attracts more drive-ins to your station
Scalability for future expansion: Protect capital investment for future innovations
Powersafe Electronics: Perform in varying power conditions.
Unparalleled Security: Protect your assets as well as brand equity from tampering instances
Bronchure (PDF)
New age design: Fresh design that attracts more drive-ins to your station
Scalability for future expansion: Protect capital investment for future innovations
Powersafe Electronics: Perform in varying power conditions.
Security of your assets was one of your biggest concerns. So we made it ours.
Unparalleled Security: Protect your assets as well as brand equity from tampering instances
Unicorn OPW Engineered Systems is a world-class manufacturer of quick and dry disconnect fittings designed to meet any fluid handling need. OPW is the expert in reducing the hazards involved with fluid handling for a multitude of industries with products used worldwide in a broad range of applications. A complete line of connections are available, including the Kamlok® and Autolok® quick disconnects, and for connections that require a dry disconnect, Kamvalok®, Drylok™ and Epsilon®, all suitable for an extensive range of hazardous liquid applications. For extreme pressure and temperature sealing applications, the Hiltap™ brand offers innovative, high-performance couplings and connectors.
We offer the most complete line of loading arm systems and loading-rack equipment for today's bulk loading and unloading requirements. Loading arm systems allow the transfer of gas or liquefied gas from one tank to another through a pipe system. When transferring gas, you will need both a bottom and top loading arm. Whether the application involves tank trucks, railcars, drums or totes, and the moving of petroleum products, liquefied gases, asphalt, solvents or hazardous/corrosive chemicals, OPW Engineered Systems is the preferred loading arm system choice worldwide.
Combined with keyboard,display,combination 12V/24V or 220V pump and flowmeter,4M delivery rubber hose,2M inlet clean plastic hose,filter,solenoid valve(option),automatic shutoff fuel nozzle with 360 degree nozzle swivel.
You can preset the total volume or price,and start refueling,the pump dispenser would stop when it arrives at the number set.All in all,it is quite a practical choice for diesel/gasoline transferring.
The Liquid Controls M-Series Model M40 rotary motion positive displacement meter offers the ultimate in measurement accuracy for custody transfer of LPG, petroleum products, aviation fuels and a broad range of industrial liquids. The M-Series meets NTEP and International Weights & Measures accuracy requirements as well as U.S. Military specifications.
Model: M40
Size: 4"
Flow rate: 450 gpm (1700 lpm)
Pressure: 150 psi (10.5 Bar)
Temperature range: -40° F to 160° F (-40° C to 71° C)
Viscosity rage: 30 SSU to 1,500,000 SSU (less than 1 centipoise to 325,000 centipoise
Materials of construction: Aluminum, Cast Iron or Stainless Steel
The Elite S automatic shutoff nozzle is designed for retail and commercial fueling sites. The familiar styling brings comfort to the end user while the lightweight construction produces a smooth- working, rugged nozzle specifically designed for safety and endurance.
The Elite S Prepay pressure-sensitive nozzle has undergone extensive engineering upgrades specifically designed to deliver the most reliable functioning nozzle. The pressure- sensitive (no pressure, no flow) feature enables the station operator to control the dispensing of fuel. The Elite S features a user-friendly one-hand hold-open latch, and the standard safety attitude device feature provides automatic shut-off if raised above horizontal or if it falls from the vehicle.
A range of two stage air compressors, that consist of two or more cylinders.The two stage compressor consists of two or more cylinders. The atmospheric air enters into the low pressure (LP) cylinder through an inlet filter & valve which passes to the high pressure (HP) cylinder through the inter-cooler for a final pressure.
The highly efficient inter-cooler provides maximum heat dissipation between stages resulting in more air per horse power and less trouble from carbonation.
Two Stage Air Compressors are useful in textile, plastic industries, paper industries, spray painting, blowing, cleaning, chemical plants, pneumatics, ceramics, automobiles, foundries, pharmaceuticals, service stations, etc.
The Piusi K33 mechanical fuel flow meter measures the exact quantity of the dispensed diesel fuel or oil through a nutating disk system. The K33 fuel flow meter measures up to 999.9 litres, and is reliable, inexpensive, and easy to install. Thanks to their reduced flow resistance, these Piusi diesel and oil flow meters can also perform well under gravity flow conditions. There are separate models available specifically for diesel fuel and oil.
Oil and diesel flow meter
Flow rate: 20-120ltr Per Min
Can be rotated to allow flow from 4 directions
1” F x F BSP Inlet/Outlet
Nutating disk system
Accuracy +/-1% after calibration
3 digit resettable and 6 digit non-resettable totaliser
IUSI Mechanical Flow Meter K44, 4 Digit 25mm FF, 20-120lpm Litre Display
Oil and diesel flow meter.
Piusi products feature a nutating disk system to accurately count how much diesel fuel or oil has been transferred.
The K44 fuel dispensers flow meter is a cost effective solution to measuring the flow of fuel up to 9999.9 litres at a time.
As well as being suitable for pumping system, these Piusi diesel and oil flow meters are also compatible with gravity fed systems once installed.
There are versions of these fuel flow meters specially designed for both diesel fuel and oil depending upon the users' requirements.
The product dispensers Flow rate: 20-120ltr Per Min.
Can be rotated to allow flow from 4 directions.
1” F x F BSP Inlet/Outlet.
Nutating disk system.
Accuracy +/-1% after calibration.
4 digit resettable and 8 digit non-resettable totaliser.
OPTION for Pulse Output Part # 00056500A-CATA - Open collector card type, frequency 10 pulses/litre, power supply 6-24 V DC, max 10 mA.
The Piusi K24 digital fuel pulse meter is a turbine pulse meter, designed for measuring the transfer of low viscosity fluids including diesel, water and windscreen fluid. This Piusi diesel pulse meter is easy to install either inline or by the delivery nozzle, and are equipped with a display which can be rotated in 4 different positions, allowing easy reading. The K24 electronic fuel pulse meter is known for its accuracy and reliability.
Diesel pulse meter
Flow rate: 5-120ltr Per Min
Fluid viscosity: 2-5.35 cSt - Max Temperature 50deg C
1” M BSP Inlet/Outlet c/w socket
Accuracy +/-1% after calibration
Electronic card with LCD display
5 digit partial totaliser and 6 digit totaliser
Features & Benefits
Long-Term Watertight Performance/Strength & Rigidity – one-piece design provides reliable watertight integrity and long product life.
Designed to resist deformation and high water table forces.
Installation Flexibility – multiple flats provide maximum area for locating pipe entries.
Easy Field Height Adjustability – the special ribbed height adjustment design makes adjustments to finished grade, if necessary, quick and easy.
Printed Circuit Board Assembly CRIND Regulator
Dimensions (Hand Measured): 9.5" x 6"
Card reader dispenser
Fuel pump system
Red Jacket STP is the most widely installed submersible fuel pump in the world. And that’s because Red Jacket continues to deliver the highest efficiency and fuel flow, together with the lowest power consumption, in the industry. Since 1878, Red Jacket has continued our tradition of building a high quality, reliable pump that is BUILT TO LAST.
Superior motor design
Higher flow rates, lower power consumption, and increased safety and reliability.
Up to 5% Increased Flow – Improved stator and receptacle housing design provides larger fuel paths.
8% Less Power Consumption – More efficient motor design results in 8% reduction in wattage.
Better Quality – Red Jacket’s motor manufacturing yields improved quality, which means more station uptime than other STPs on the market.
Universal Compatibility – Fewer parts to stock.
Improved Reliability – Improved bearing design and upgraded insulation yield longer motor life.
Increased Safety – Maximum temperature remains ~125 degrees cooler vs. competitive models. Enhanced connectors separation meets latest flameproof standards.
Advanced packer manifold design
Fast installation, simple service and testing, and sets the standard for electrical and environmental safety:
Built-in Isolated Contractor’s Box – Electrical connection housing is built into the manifold and is completely isolated from the fuel path.
Easy to Install and Service – No adjustment required to fit yoke, assembly is quick.
Increased Electrical Safety – Automatic electrical yoke disconnects upon removal of extractable bolts.
Environmentally Friendly – Automatic breaking of extractible seal upon bolt removal ensures automatic fuel drain back into tank, protecting the environment from contamination and site owners from related liability.
Innovative Check Valve Design – “Open” setting makes for easier line tests and servicing.
Electrofusion Pipework
A True Liquid Tight Solution
Since being introduced as the world’s first electrofusion pipework system for fuel applications over thirty years ago, UPP semi-rigid pipework has become known globally as the standard for liquid tight pipework systems. Synonymous with words like “safe”, “efficient” and “simple” throughout petroleum equipment installer circles, UPP pipework utilises the advanced electrofusion welding process to effectively bond system components together into one, leak proof system.
Download Datasheet
Simple Installation
The UPP electrofusion welding process is safe and simple to complete in any climate and virtually any weather condition. An installer simply prepares the components, fits them together attaching welder leads to the fitting, and then presses a single button on the welding unit to initiate the process. The welder unit itself calculates the exact settings required to complete the weld, regardless of the pipework diameter or temperature, leaving no settings for the installer to input.
Designed to deliver a constant voltage to a load at its output terminals regardless of the changes in the input or incoming supply voltage. It protects the equipment or machine against over voltage, under voltage, and other voltage surges.
Total Access
You can access or monitor your sites via any web browser on a PC or PDA. The TLS-450 Direct AccessT software can be downloaded on a PC to securely control and modify configuration, upgrades and diagnostics
Total Control
Customize multi-level password access, alarms, email notifications, reports, built-in “help” and dashboard views to make sure all sites are under control.
Master Set up
Factory-loaded setup on the TLS – 450 offers uniform configuration across all sites, including passwords. This blocks unauthorized changes to your set up and notifies you of any modifications
Extended Storage
Back up of reports, alarms, compliance, inventory, delivery and reconciliation data for up to 3 years
Automatic Reconciliation
Identify causes of variance for quick resolution and save you money.
Removes many of the traditional uncertainties associated with wet stock loss analysis, allowing operators to quickly comprehend the effects of delivery, temperature and other variances and understand the critical areas on which to focus efforts for maximum advantage.Your site will benefit from optimum inventory, better delivery scheduling and reduced risk outages
Graphical touch screen display for easy operation
Simple, touch-screen menu navigation means that clearly presented key facts and figures are literally at your fingertips.Intuitive operation means site staff can quickly and easily use the system with the minimum of training.
Optimal risk management and environmental protection for the whole forecourt
Cover all aspects of loss using leak sensor monitoring, automatic reconciliation of fuel throughput and identification of variance components of temperature delivery. Protect pressure lines by testing to precision levels as the site operates, with STP shutdown for leaks, water detection and dry-run conditions.
More Control
Track every drop of fuel from supply points to delivery in your customers’ tanks
Timely reporting that helps you make decisions fast
Less Effort
Drive more efficient fuel operations by improving fuel management and inventory control
Resolve ATG alarms remotely, improving site up time and lowering servicing costs
Simplify compliance paperwork and reduce your risks
Compliance management doesn’t generate revenue, but it can affect your bottom line. If not managed properly, compliance management can drain your resources and expose you to environmental and financial risks
Key benefits:
Automated SIR or Manual
Loss identification, indication of theft, temperature variance, short deliveries and over dispensing from pumps
Leak detection and risk management in compliance with APEA Blue Book Leak Detection Systems Class 6a and 6b- Independently certified to meet US EPA requirements of 0.38 or 0.76 litres per hour leak detection- Automated reconciliation and loss reports- No tank gauge, No problem! Gilbarco Veeder-Root offer SIR services using manual data collection and by using statistical analysis, we can suggest corrective actions
Variance Management Identifies the amount of fuel variance due to temperature and short delivery on each site each month
Alarm Management Real-time management of tank gauge alarms with diagnostics, remote fix and dispatch management
Alarm Monitoring Automatic third-party email notification of critical tank events
Inventory Planning
Delivery Scheduling
Delivery Verification
Provide an audit trail of deliveries across the network
Daily Loss Advisor
Identifies controllable sources of fuel loss quickly
Set-Up Monitoring
Flow Management
The Multi Use Media Isolated Probe kit allows the industry-proven Mag Plus Probe to provide Chemical* and LPG** customers the same high levels of inventory measurement performance that petroleum customers have come to expect from Veeder-Root.
A unique feature of this adapter kit is the user’s ability to remove the probe shaft from its stainless steel jacket for maintenance at any time without disturbing the tank’s liquid product contents, or in the case of an LPG customer, having to first depressurise the tank.
Key benefits:
Highly accurate Magnetostrictive measurement technology compatible with all current TLS consoles.
Non-corrosive, stainless steel tubing for long-life monitoring in a wide spectrum of alternative fluids and pressurised environments.
Chemical adapter kit’s Stainless Steel Floats can be used in all NEC Class1, Group D liquids environment specific gravity of .70 or above.
Chemical adapter kit equipped probe capable of reading product level down to 3.3″.
LPG adapter kit equipped probe capable of reading product level down to 3.25″.
Chemical adapter kit allows probe to easily fit into a 2″ NPT tank opening.
LPG adapter kit easily fits a 1.5″ NPT tank opening.
Both Chemical and LPG kit probes are easily removed from tank without disturbing liquid inventory or having to depressurise the LPG tank.
